BLACK 1.5 Quart Kit Pond Armor Shield Non Toxic Epoxy Sealer Pond Liner Paint

Description

Black Pond Armor
1 Quart covers up to 60 sq. ft.
Kit contains:
Part A Resin
Part B Hardener
Thickness Gauge
Instructions
Kit yields 60 square feet at 10 mils thickness on a smooth surface.
Pond Armor is specialized in non-toxic epoxy liner system designed for the pond industry. The days of needing a pond liner to complete your pond are over. If you want to create a pond with a more natural look or you'd like to build a more formal pond, without covering up all of your beautiful work with a pond liner, the Pond Armour epoxy pond liner system is for you!
Pond Armour epoxy pond liner system can be used for any type of water feature. Koi ponds, waterfalls, fountains and water gardens to name a few. You'll find that our epoxy pond liner systems are non-toxic meaning they are fish and plant safe. Pond Shield is a NON-HAZMAT and costs less to ship too! For most applications, a single coat application is all is needed for proper coverage and your finished epoxy pond liner will be complete and virtually maintenance free!
Pond Armour epoxy pond liner systems offer both strength and flexibility in a coating. Flexibility and strength that is tested down to -78 F, all the way up to 140 F, our epoxy liner systems have a proven record that speaks for itself. These are epoxy pond liner systems that have been specifically designed to bond to porous or abraded materials. With a tensile bond strength that was found to be stronger than the internal strength of the oncrete it was applied to, you can rest assured that your single coat of pond epoxy will stick to what you apply it to.
Over time, hairline cracks can form in mortar or grout joints as well as concrete. The last thing you need is for this to happen and then be transferred to your epoxy pond liner, causing a leak. Being flexible, our epoxy pond liner systems resists mimic cracking like this and provide you with the best protection possible in your coating. It's also possible to enhance the performance of your epoxy pond liner (in crack susceptible areas) by using it along with fiberglass mat or tape and as a filler when mixed with colloidal silica of micro fibers.
There are other coatings on the market, but what you get with our epoxy pond liner system is peace of mind. This peace of mind comes from knowing you didn't pay outrageous prices for installation of your pond coating, or from knowing you didn't have to purchase anything extra like primers or thinners for your coating. Your peace of mind will also come from knowing that once our epoxy pond liner system is applied, you only spent about .24 per square foot and that your new epoxy pond liner will be easy to maintain and provide you with the aesthetics you always wanted from your pond. That means, no more unsightly folds or creases. You'll have a surface that algae just wipes right off!
Pond Shield Epoxy by Pond Armor FAQ:
What can Pond Shield be applied to?
Pond Shield can be applied to concrete, cement, shotcrete, gunite, stone, tile wood, steel, aluminum, rock, some plastics, old coatings (as long as they are prepared properly first) fiberglass, and many more surfaces.
Can I coat my pond liner with Pond Shield?
No. Pond Shield is designed to be applied to any constructed surface like those listed above. Pond Shield-FSP would be more suited to that.
Is Pond Shield fish and plant safe?
Absolutely! We actually send Pond Shield samples out to be tested in the mixed, uncured state to be sure no harm will come to your aquatic life.
How long before I can put water and fish in my pond?
The instructions will tell you to wait for 72 hours. However, if you inspect every bit of your coating the next day and are sure that it is dry and there are no tacky spots anywhere, you can add water and fish.
How does Pond Shield compare to other products available to me?
Pond Shield was specifically designed around the flaws of virtually every other coating available in the pond industry. It is competitively priced and costs not much more than a rubber liner per square foot but offers much more stability. Pond Shield can be applied by you, the home owner and does not require a specialized crew for installation. Pond Shield has been referred to as "bullet proof", "tough as nails" and "strongest coating ever used" to quote a few. While these are figurative forms of speech, Pond Shield has been designed strong and flexible to provide you with many years of virtually maintenance free service.
Can Pond Shield be applied over other old coatings?
Yes. However, you should take care to properly prepare the surface prior to applying Pond Shield. Be sure to remove any old coating that is coming off, but the best case scenario is to remove all of the old coating prior to application. It's best not to rely on the failing bond of the old coating. If you find that some of the old coating is still bonding sufficiently, then you should sand the remainder with at least 60-grit sandpaper to give the material tooth.
How many coats do I have to apply?
Well that depends on whether you use a pigmented version of Pond Shield or the clear Pond Shield. The pigmented versions of Pond Shield are thick like grease and can be applied in one 10mil coat. Pond Shield clear is only as thick as syrup and should be applied in three 3-4mil coats for a total of 10mils finished thickness.
Can I apply a second coat of Pond Shield over the first?
Yes, but it is not necessary unless you are trying to correct the first coat application. Pond Shield is designed to perform properly at a finished thickness of 10mils. Applying it thicker will not hurt, but will cost more in regards to materials. If you have to touch up and area you can apply Pond Shield over the top of itself with no extra surface preparation within 24 hours of the original application. After that 24 hour period, you should scuff the area being coating to give the material tooth.
I applied Pond Shield and my pond still leaks. What is wrong?
Simply put, you missed something. After your initial coating is applied, you need to go back and inspect the entire surface are for flaws in your application. Ares like cracks, crevices, voids, concrete showing through and any similar areas need to be corrected before you call the job finished. Once you have successfully applied a 100% coating to the interior of your pond, it will not leak.
Can I use Pond Shield to waterproof my water garden planters?
Yes. Pond Shield has been designed specifically for ponds and water gardens, but does have a great deal of other uses as well.
Can I get Pond Shield in a color other than the ones you currently have?
Yes. We can match any solid color you choose. Just send us a paint chip with the color you'd like and we'll match it. Because of the way the components that make up Pond Shield are mixed, you have to order a minimum of 10 quart and a half kits when ordering a custom color.
Do I have to acid etch my concrete before I apply Pond Shield?
Absolutely. There are two very important reasons for acid etching. First, the muriatic acid will remove and calcium deposits that form as concrete cures. These calcium deposits will fall over time anyway and you do not want to have your coating bonded to them. Finally, acid etching will neutralize the alkaline properties in the surface of the concrete, creating a much better bond.
Can I just spot coat a crack in my pond?
That is not advisable. If you give Pond Shield the very best circumstances in which to work, you'll end up with a coating that will give you years and years of service. You should apply a complete coating so that it will work the way it was meant to work.